Shurflo 5.0 Pro Blaster 2 Deckwash Pump 24v

Model Number: RWB5911
Max flow: Tooltip 19 L/min
Voltage: 24 volt
Amp draw: 7 amp
Pressure: Tooltip cut out 60PSI
Inlet/Outlet size: 12mm
Self priming to: 1.8m vertical lift
Liquid to be pumped: Clean water
$ 689.00
Add to Cart
Rating: Not Rated Yet

Shurflo water pump range includes the 24v Shurflo Pro Blaster 2. The Shurflo Pro Blaster 2 is the ultimate automatic deck wash pump from Shurflo delivering high performing 5GPM (19 L/min) to blast your decks, anchoring hardware and fishing platforms clean.

With a maximum pressure of 60PSI these Shurflo deck wash pumps have heavy duty electro coated motor with O ring sealed end bell and sealed wire entries on the motor shell and the pressure switch.

The NPT ports are 1/2" male thread and the set includes an inlet strainer (must be used to keep clear of debri), hose gun, 2 x 3/4" (20mm) straight hose barb fittings and a USA GHT fitting to connect to HoseCoil hose.

  • Shurflo deck wash pumps must be used with Shurflo fittings and the Shurflo strainer to avoid debris getting into the pump.
  • Always mount the pump in the driest location possible.
  • Read and follow the installation and usage instructions provided in the box with the pump.
  • This Shurflo model also available in 12v

Browse Water Pumps Now Australia great range of Shurflo pumps, deck wash kits and accessories, visit our full range of 12v and 24v water pumps or contact us if you require assistance.

  • Fully automatic - just squeeze the trigger
  • 5GPM (19 L/min) flow with 60PSI shut off pressure
  • 2 year limited warranty
  • Self priming to 1.8m (6ft) vertical lift
  • Corrosion resistant seamless electro-coated motor casing
  • Sealed pressure switch unit and motor end bell
  • Ignition protection and thermal overload protection
  • Santoprene Diaphragm with EPDM valves and seals
  • Includes strainer, hosegun, 2 x 20mm 3/4" barbed hose fittings and USA garden hose fitting 
  • Comes in both 12v and 24v models