Shurflo 4.0 Pro Blaster 2 Deckwash Pump 24V

Model Number: RWB5909
Max flow: Tooltip 15 L/min
Voltage: 24 volt
Amp draw: 6 amp
Pressure: Tooltip cut out 60PSI
Inlet/Outlet size: 12mm
Self priming to: 1.8m vertical lift
Liquid to be pumped: Clean water
$ 682.00
Add to Cart
Rating: Not Rated Yet

Shurflo Pro Blaster 2 Deckwash Pump 24V Specifications & Features

Blast the dirtiest of boat decks clean with the Shurflo 4.0 Pro Blaster 2 deck wash water pump. These 4 chamber 4 gallon per minute (15 L/min) 24v Shurflo pumps for deck wash applications are high performing with pressure up to 60PSI.

This Shurflo water pump is in kit form and designed as a unique over-moulder single piece diaphragm with heay duty electro coated motor with O ring sealed end bell and sealed wire entries on the motor shell and the pressure switch.

The Shurflo 4.0 Pro Blaster 2 PNPT ports are 1/2" male thread and the Shurflo pump kit includes an inlet strainer (must be used to keep clear of debri), hose gun, 2 x 3/4" (20mm) straight hose barb fittings and a USA GHT fitting to connect to HoseCoil hose.

  • Shurflo marine deck wash pumps must be used with Shurflo fittings and the Shurflo RWB2957 strainer to avoid debris getting into the pump.
  • Always mount the pump in the driest location possible.
  • Read and follow the installation and usage instructions provided in the box with the pump.
  • This model Shurflo pump is also available in 12v.
  • Fully automatic - just squeeze the trigger
  • 4GPM (15 L/min) flow with 60PSI shut off pressure
  • 2 year limited warranty
  • Self priming to 1.8m (6ft) vertical lift
  • Corrosion resistant seamless electro-coated motor casing
  • Sealed pressure switch unit and motor end bell
  • Ignition protection and thermal overload protection
  • Santoprene Diaphragm with EPDM valves and seals
  • Includes strainer, hosegun, 2 x 20mm 3/4" barbed hose fittings and USA garden hose fitting