Shurflo 5.0 Pro Blaster 2 Deckwash Pump 12V

Model Number: RWB5910
Max flow: Tooltip 19 L/min
Voltage: 12 volt
Amp draw: 14 amp
Pressure: Tooltip cut out 60PSI
Inlet/Outlet size: 12mm
Self priming to: 1.8m vertical lift
Liquid to be pumped: Clean water
$ 796.00
Add to Cart
Rating: Not Rated Yet

Shurflo 5.0 12v Pro Blaster Deckwash Pumps

Shurflo water pump range includes the 12v Shurflo Pro Blaster 2. The Shurflo Pro Blaster 2 is the ultimate automatic deck wash pump from Shurflo delivering high performing 5GPM (19 L/min) to blast your decks, anchoring hardware and fishing platforms clean.

With a maximum pressure of 60PSI these Shurflo deck wash pumps have heavy duty electro coated motor with O ring sealed end bell and sealed wire entries on the motor shell and the pressure switch.

The NPT ports are 1/2" male thread and the set includes an inlet strainer (must be used to keep clear of debri), hose gun, 2 x 3/4" (20mm) straight hose barb fittings and a USA GHT fitting to connect to HoseCoil hose.

  • Shurflo deck wash pumps must be used with Shurflo fittings and the Shurflo strainer to avoid debris getting into the pump.
  • Always mount the pump in the driest location possible.
  • Read and follow the installation and usage instructions provided in the box with the pump.
  • This Shurflo model also available in 24v.
  • Fully automatic - just squeeze the trigger
  • 5GPM (19 L/min) flow with 60PSI shut off pressure
  • 2 year limited warranty
  • Self priming to 1.8m (6ft) vertical lift
  • Corrosion resistant seamless electro-coated motor casing
  • Sealed pressure switch unit and motor end bell
  • Ignition protection and thermal overload protection
  • Santoprene Diaphragm with EPDM valves and seals
  • Includes strainer, hosegun, 2 x 20mm 3/4" barbed hose fittings and USA garden hose fitting