FL Water Pump Pressure Switch and Seal Kit - 12v 24v 240v 40 PSI

Don't get caught out. Always carry a spare Escaping Outdoors 40 PSI pressure switch and seals just in case! This pressure switch suits FL40, FL44 and FL43 water pumps.

Failure of an Escaping Outdoors caravan style DC diaphragm water pump can usually be attributed to the pressure switch. Designed to regulate the delivery pressure, the pressure switch works by turning the pump off when the set pressure is reached, and turns the water pump back on again if the pressure drops.

If your pressure switch fails after a short time (less than 12 months) this can be an indication that the pump set up needs refining and probably requires an accumulator tank (pressure tank) in the system. Please call for assistance with your set up. Do check that this switch matches your pressure switch which you are replacing.

Pressure switch and seal kits available in this range are - 17 PSI, 35 PSI, 40 PSI, 60 PSI and 100PSI.

Check out article in FAQ's on how to test for a failed pressure switch and other articles which may be of interest. 

Browse Water Pumps Now Australia for our range of pump accessories, marine parts and accessories, 12v and 24v water pumps or contact us for assistance. We'll help you to troubleshoot your issue or help with your parts order.

Application

Caravan pumps, Marine pumps, Camping Pumps

Features
  • 40 PSI Pressure Switch + Seal Kit
  • Simple and easy to replace
  • Fine tune pressure adjustment screw
  • Overall dimensions 32 x 32 x 26mm
  • Mounting screw holes 35mm centre to centre
  • Your switch and seal kit will be sent with Tracking
  • Make sure your screw holes from your current switch will match