Jabsco Par-Max 2.9 24V Pressure Pump

$ 224.00
Model Number: J20-105
Max flow: Tooltip 10.9 L/min
Pressure: Tooltip 25 PSI cut-in 50 PSI cut-out
Inlet/Outlet size: 12mm
Self priming to: 2 metres
No. taps/outlets: 1 - 3
Amp draw: 10 amp
Voltage: 24 volt
Packaging Size (cm): 25 x 11 x 17cm
Packaging Weight (kg): 2.5kg
Liquid to be pumped: Freshwater
Ask a question about this product

Shop Jabsco 24V Par-Max 2.9 GPM water pump. A reliable marine grade caravan & boat pressure pump for a 24 volt environment, providing a smooth flow and hassle free operation. The three chamber positive displacement diaphragm, permanent magnet motor with double ball bear armature is the lastest in quality design in 24 volt pumps.

Ideal to pump water anywhere in a 24 volt environment, the Jabsco Par-Max 2.9 water pump provides a smooth flow and hassle free operation.

Automatically turns on and off when you turn the tap on and off. Runs up to 3 outlets with very smooth water flow, (e.g. shower, tap, sink).

The Jabsco Parmax 2.9 gives very smooth water flow even at low demand due to its built in pulsation dampening by-pass valve which controls unwanted cycling and reduces noise.

For our full range of Jabsco water pumps, parts and accessories click here. 

For our full range of 24V pumps including bilge, inline, submersible, macerator and pressure pumps click here.


  • Pleasure craft boats to 9 metres
  • Caravan, RV's and Motorhomes
  • Jabsco – world leading brand
  • 3 year warranty
  • Long life sealed motor
  • Automatically turns on and off
  • Silent operation
  • Built in bypass lowers pulsation and noise
  • No need for accumulator tank
  • Reliable performance
  • Run dry without damage for extended period
  • Automatic thermal overload cutout
  • Made from durable, corrosion resistant materials
  • Supplied complete with fittings 2 x 12mm barbed for hose, 2 x 1/2" male thread
  • Installation instructions included
  • Must be used with a filter
  • Self Priming to 3 metres
  • Permanent Magnet Motor 
  • Also available in 12 Volt


  • A pump guard strainer is recommended to screen debris from entering the pump. Sold separately. 
  • Mount pump in driest location
  • Follow pump instructions for correct set-up
  • Motors are not waterproof and should not be subject to external water contact