RM5000-3 Submersible Rain to Main System with RPS050

$ 1189.00
Model Number: RM5000-3
Max flow: Tooltip 105 L/min
Head/Draw: Tooltip 5m
Pump rating: Tooltip 50 L/min, 39m head
Pressure: Tooltip 50PSI
Inlet/Outlet size: 25mm
Impellers: 7 impellers
Horse power: Tooltip 1.1HP, 0.8KW
No. taps/outlets: 6 - 9
Amp draw: 4.6 amp
Voltage: 240 volt
Cable length: 10m
Packaging Weight (kg): 12.5kg
Packaging Size (cm): 12.5 x 95cm
Liquid to be pumped: Clean water
Ask a question about this product
The RM5000-3 rain to mains pressure pump system with RPS050F submersible pressure pump is designed for speed of installation with integrated pressure controller, no solenoid valve or electronic controls. This submersible rain to main pressure pump system stops mains supply while the rain water is in the tank to help conserve your precious rain water. This rain to mains system is suitable for underground tanks and is best suited for the supply of toilet, laundry and garden taps / outlets. Also suitable for whole house supply for one bathroom dwellings. Two year warranty.
Available with 2 rain to mains submersible pressure pump size options. RPS050F (this listing) or RPS036 smaller submersible pump option.
Extensive range of rain to mains pressure pump options & changeover valves available in store or phone 1300411366 to discuss other options for your application.
  • Domestic toilet & laundry
  • Garden irrigation
  • Small house / cabin / granny flat (1 bathroom)
  • Small commercial / industrial
  • Toilet blocks (up to 6 fixtures)
  • Construction / mine site offices
  • Watermark certified componentry
  • This system automatically checks for rainwater. If there is no tank supply, the mains supply flows
  • Valveset is 100% hydraulic - no electronics
  • Simply plug in - no electrician required
  • Affordable solution for new and old installations
  • Pump has integrated pressure controller, run dry protection and leak detection functions
  • Compact design with water cooled motor
  • Corrosion resistant
  • Base ensures suction inlet is out of sludge that builds up on the bottom of rainwater tanks
  • Tested to AS4020 for potable water
  • Grade 304 stainless steel casing & shaft
  • Plastic impellers and diffusers
  • 10m power cable 
  • Plastic pump base and discharge body
  • Brass valveset

RM5000 3 with Reefe RPS series submersible pressure pump and RMV3550 specifications

Reefe rains to mains specification options

RM5000 3 rains to mains submersible pump system performance chart