RIC075.3 Manual Cutter Pump

Model Number: RIC075.3
Max flow: Tooltip 11 L/sec (660 L/min)
Head/Draw: Tooltip 12m
Inlet/Outlet size: 50mm
Horse power: Tooltip 1HP, 0.75KW
Amp draw: 5.5 amp
Cable length: 10m
Solids handling: 35mm
Voltage: 415 volt
Packaging Size (cm): 27.6 x 23.4 x 49.2cm
Packaging Weight (kg): 21kg
Liquid to be pumped: Sewage - Farm - Trade Waste
$ 1228.00
Add to Cart
Rating: Not Rated Yet

Industrial standard heavy duty submersible sewage cutter pump with 12m head moving and cutting effluent, sewage and trade waste up to 660 litres per minute. Our range of cutter pump are often used in domestic Pump Stations where raw effluent or sewage needs to be pumped from an underground tank uphill to the septic system.

Other models of the Reefe RIC cutter pump series available in 415v - see pump options in the specifications table.

Note: The design will vary depending on the model. 1 year warranty.

Available in packaged pump stations with pump well/tank and controls to meet your pumping requirements.

Contact us at Water Pumps Now Australia via email for or phone on 1300 411 366 if you are unsure of which cutter pump will best suit you. Our engineers are here to help!

What applications are submersible sewage cutter pumps used for

Sewage cutter pumps are designed to cut the raw sewage (solids) and toilet paper up as it passes through the cutting blades. We do not endorse cutter pumps for PUBLIC FACILITIES and RENTAL applications due to the common incidence of non-sewage articles being place in the sewer. For all other applications other than owner-occupied domestic situations it is advised to use a sewage grinder pump.

Tough performing the motors of these cutter pumps are precision manufactured, built to the highest standards to ensure consistant reliability and endurance. The triple seal system on the submersible cutter pumps provides additional protection from the harsh environment found in sewage systems.

  • Sewage
  • Farm waste
  • Trade Waste
  • Waste Treatment Facilities
  • Effluent
  • Flows up to 11 L/sec
  • Maximum head to 12m
  • Thermal overload protection
  • Auto coupling kits available
  • Manual and auto (float switch) options available
  • 3 phase and 240v versions available
  • Lip seal and double silicone-carbide / ceramic mechanical seal with oil chamber
  • Large capacity oil chamber with protective lip seal
  • Non-clog impeller, with tungsten blade
  • 10m H07RNF grade cable
  • IP68 with Class F insulation

Reefe cutter pumps specifications Water Pumps Now

Reefe RIC series industrial cutter pump performance graph - Water Pumps Now