RCP040A Auto Cutter Pump

$ 1111.00
Model Number: RCP040A
Head/Draw: Tooltip 10m
Max flow: Tooltip 5 L/sec 300 L/min
Solids handling: 15mm
Inlet/Outlet size: 50mm
Horse power: Tooltip 0.5HP, 400W,
Amp draw: 1.2 amp
Voltage: 240 volt
Cable length: 10m
Packaging Size (cm): 24.5 x 18.8 x 42cm
Packaging Weight (kg): 18kg
Liquid to be pumped: Sewage - Farm - Trade Waste
Ask a question about this product
Rating: Not Rated Yet

Industrial standard heavy duty automatic submersible sewage cutter pumps with 10m head, pumping 300 L/min of effluent, trade and sewage waste. Our Reefe cutter pumps are often used in domestic pump stations where raw effluent or sewage needs to be pumped from an underground tank uphill to the septic system. 

Other models available in this cutter pump series with automatic, manual and both single and 3 phase options available - see pump options in the specifications table.

Note: The design will vary depending on the model. 1 year warranty.

Available in packaged pump stations with pump well/tank and controls to meet your pumping requirements.

What applications are submersible sewage cutter pumps used for

Sewage cutter pumps are designed to cut the raw sewage (solids) and toilet paper up as it passes through the cutting blades. We do not endorse cutter pumps for PUBLIC FACILITIES and RENTAL applications due to the common incidence of non-sewage articles being place in the sewer. For all other applications other than owner-occupied domestic situations it is advised to use a sewage grinder pump. 

Tough performing the motors of these cutter pumps are precision manufactured, built to the highest standards to ensure consistant reliability and endurance. The triple seal system on the submersible cutter pumps provides additional protection from the harsh environment found in sewage systems.

Browse Water Pumps Now Australia range of cutter pumps, grinder pumps and our full industrial pump range or contact us for assistance.

  • Sewage
  • Farm waste
  • Trade Waste
  • Waste Treatment Facilities
  • Effluent
  • Flows up to 5 L/sec
  • Maximum head to 10m
  • Thermal overload protection
  • Auto coupling kits available
  • Manual and auto (float switch) options available
  • 3 phase versions available
  • Lip seal and double silicone-carbide / ceramic mechanical seal with oil chamber
  • Large capacity oil chamber with protective lip seal
  • Non-clog impeller, with tungsten blade
  • 10m H07RNF grade cable
  • IP68 with Class F insulation

Reefe RCP040A industrial grade cutter pump specifications

Reefe RCP040A industrial grade cutter pump flow chart