Rule 4000 Electric Submersible Bilge Pump 24v

Model Number: RWB5176
Max flow: Tooltip 252 L/min
Inlet/Outlet size: 50mm
Amp draw: 15.5 amp
Voltage: 24 volt
Packaging Size (cm): 19.7 x 12.4 x 12.4cm
Packaging Weight (kg): 2.5kg
Liquid to be pumped: Fresh - Salt Water
$ 704.00
Add to Cart
Rating: Not Rated Yet

Water Pumps Now extensive range of 12v and 24v boat bilge pump range includes this highest capacity extra heavy duty 24v Rule bilge pump with a 2" hose outlet. This Rule bilge pump has many marine and solar applications and is able to transfer over 15,000 L/hr (252 L/min).

Ideal bilge pump for surf boats, large pleasure craft and commercial vessels. Also can be used on a farm or commercially on a solar set up as a general purpose transfer pump.

The snap on strainer base makes for easy cleaning and fitting of your submersible bilge pump. Includes stainless screws and a clip to secure a float switch.

This extra heavy duty bilge pump is designed and built to give years of reliable service. It draws a low current while pumping out a massive volume of water while being very compact.

Automate your bilge pump by adding the Rule Float Switch ( RWB19 orRWB98 ).


  • Surfboats
  • Large pleasure boats
  • Commercial craft
  • Commercial submersible transfer pump
  • Manual 24 Volt
  • Fully portable
  • Manual operation
  • Can pump fresh or salt water
  • Extra Heavy Duty water/air cooled motor
  • Ignition protected
  • Can run dry for short periods
  • Teflon seals and stainless shaft
  • Snap off strainer
  • Easy to install and operate
  • Robust
  • Maximum fluid temperature 60 degrees
  • Comes with instructions
  • 3 year limited warranty
Rule bilge pump range performance graph -Water Pumps Now