Rule 800 24v Marine Bilge Pump 50 L/min

Model Number: RWB804
Max flow: Tooltip 50 L/min
Inlet/Outlet size: 20mm
Amp draw: 1.7 amp
Voltage: 24 volt
Packaging Size (cm): 11.2 x 6.4 x 7.4cm
Packaging Weight (kg): 0.3kg
Liquid to be pumped: Fresh or Salt Water
$ 171.00
INCL GST
Add to Cart

The Rule 800 24v marine bilge pump is a compact and fully submersible 800 GPH electric pump for use as a bilge pump or bait pump on smaller craft or boats or can be used simply for water transfer. Extremely efficient these pumps draw a low current while offering high capacity output. Water cooled with an ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. NON-Automatic bilge pump - requires a Rule float switch to operate automatically. Please note - using the included check valve will reduce the output flow of the pump. Available in both 12 volt and 24 volt models. A Threaded hose outlet suits 20mm (3/4") hose. 1 x straight port provided.

RULE 800 24v Marine Bilge Pump Applications

  • General purpose transfer pump
  • Bilge pump

RULE 800 24v Marine Bilge Pump Features

  • Fully submersible pump
  • Snap on strainer base
  • Compact size and design to fit in the smallest places
  • Stainless steel shaft
  • Higher flow - optimised impeller to provide greater flow at low amp
  • High efficiency, low amp draw ignition protected motor
  • Infused water blocking feature - to stop water wicking down inside the wiring
  • Built-In thermal cut-out (TCO) in the motor provides extra protection
  • Backflow prevention - includes a removable check valve (Please note - using the check valve will reduce the rated output flow).
  • Threaded discharge port - gives easier installation and maintenance.
  • Discharge hose port is included with each pump
  • Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
  • 3 year warranty
Rule bilge pump range performance graph -Water Pumps Now