fbpx

Rule 800 Automatic Sensing Bilge Pump 12V

$ 189.90
Model Number: RWB809
Max flow: Tooltip 50 L/min
Inlet/Outlet size: 20mm
Amp draw: 3.4 amp
Voltage: 12 volt
Size (cm): 12.0 x 6.4 x 7.4cm
Weight (kg): 0.3kg
Liquid to be pumped: Fresh - Salt Water

Next generation compact submersible 800 GPH Automatic Sensing electric bilge pump - no float switch required.

How the Automatic Sensing pumps work - The “S” series automatic sensing RULE bilge pumps work on the principle of impeller resistance. The pump turns on every 2 1/2 minutes for about 1 second to sense for water. If water is present, the pump will sense resistance at the impeller and continue to run until water is removed. After that it will resume checking for water every 2 1/2 minutes. Water level is kept between 1/8” 3mm low and 3/8’ 10mm high.

Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. This pump is extemely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space. Please note - using the included check valve will reduce the output flow of the pump. Consumes only 0.20 amps per day. 12 or 24 DC only - Cannot be run through 240v transformers. Available in both 12 volt and 24 volt models. This listing is for the 12 volt model. 3 year limited warranty.

Application
  • Submersible pump
  • Bilge pump
  • General transfer pump
Features
  • Fully submersible pump
  • Snap on strainer base
  • Compact size and design to fit in the smallest places
  • Stainless steel shaft
  • Higher flow - optimised impeller to provide greater flow at low amp
  • High efficiency, low amp draw ignition protected motor
  • Infused water blocking feature - to stop water wicking down inside the wiring
  • Built-In thermal cut-out (TCO) in the motor provides extra protection
  • Backflow prevention - includes a removable check valve (Please note - using the check valve will reduce the rated output flow).
  • Threaded discharge port - gives easier installation and maintenance.
  • Discharge hose port is included with each pump
  • Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
  • 3 year warranty

Rule Bilge pumps performance graph