fbpx

RIC220.3 Cutter Pump - 3 phase

$ 2275.00
Model Number: RIC220.3
Max flow: Tooltip 17 L/sec (1020 L/min)
Head/Draw: Tooltip 20m
Inlet/Outlet size: 80mm/3 inch
Solids handling: 35mm
Cable length: 10m
Horse power: Tooltip 3HP, 2.2kW
Amp draw: 4.7 amp
Voltage: 415 volt
Size (cm): 27 x 25.8 x 53cm
Weight (kg): 34kg
Liquid to be pumped: Sewage - Farm - Trade Waste

Industrial standard heavy duty three phase 415V submersible sewage cutter pumps can lift water up to 20 metres and pump effluent up to 1020 litres per minute. Our range of cutter pumps are often used in domestic Pump Stations where raw effluent or sewage needs to be pumped from an underground tank uphill to the septic system. Three phase 415V & single phase 240V cutter pumps available.

Other models of the RIC series available - see pump options in the specifications table.

Note: The design will vary depending on the model. 1 year warranty.

Available in packaged pump stations with pump well/tank and controls to meet your pumping requirements. Contact us or phone 1300 411 366 and our engineering team will recommend the best pump station or cutter pump for your application. 

What applications are submersible sewage cutter pumps used for

Sewage cutter pumps are designed to cut the raw sewage (solids) and toilet paper up as it passes through the cutting blades. We do not endorse cutter pumps for PUBLIC FACILITIES and RENTAL applications due to the common incidence of non-sewage articles being place in the sewer. For all other applications other than owner-occupied domestic situations it is advised to use a sewage grinder pump. 

Tough performing the motors of these cutter pumps are precision manufactured, built to the highest standards to ensure consistant reliability and endurance. The triple seal system on the submersible cutter pumps provides additional protection from the harsh environment found in sewage systems.

Application
  • Sewage
  • Farm waste
  • Trade Waste
  • Waste Treatment Facilities
  • Effluent
Features
  • Flows up to 17 L/sec
  • Maximum head to 20m
  • Thermal overload protection
  • Auto coupling kits available
  • Manual and auto (float switch) options available
Construction
  • Single phase versions available
  • Lip seal and double silicone-carbide / ceramic mechanical seal with oil chamber
  • Large capacity oil chamber with protective lip seal
  • Non-clog impeller, with tungsten blade
  • 10m H07RNF grade cable
  • IP68 with Class F insulation

Reefe RCP and RIC industrial cutter pumps specifications

Reefe RCP and RIC industrial cutter pumps performance graph