Pressure Switch and Seal Kit - 12v 60 PSI Type 3

Type 3 pressure switch and seal kit suiting the Escaping Outdoors FL60, FL60BP and FL60CBP 12 volt water pumps. 

Failure of a 12v caravan style water pump can usually be attributed to the pressure switch. Designed to regulate the delivery pressure, the switch works by turning the pump off when the set pressure is reached, and turns the pump back on again if the pressure drops.

Escaping Outdoors 12V Pressure Switch and Seal Kit 60PSI Type 3 Features

  • Type 3 60 PSI Pressure Switch + Seal Kit.
  • Simple and easy to replace.
  • Pressure Adjustment Screw to reduce the PSI.
  • Your Pressure Switch and seal kit will be sent with Tracking.
  • Make sure your screw holes from your current switch will match. (34mm centres)
  • Type 3 60psi pressure switch is also available as a pressure switch only

Failure of a caravan style diaphragm water pump can usually be attributed to the pressure switch. Designed to regulate the delivery pressure, the switch works by turning the pump off when the set pressure is reached, and turns the pump back on again if the pressure drops.

If your pressure switch fails after a short time (less than 12 months) this can be an indication that the pump set up needs refining. Please call for assistance with your set up.

Check out article in FAQ's on how to test for a failed pressure switch and other articles which may be of interest.