fbpx

PC13A Pump Controller

$ 75.00
Model Number: PC13A
Pressure: Tooltip 44PSI
Inlet/Outlet size: 25mm

The PC13A automatic pump controller is for pressure pumps under 2 HP. This electronic pressure controller makes using your pump at home much easier. Turn on a tap, and the controller will automatically switch on the pump. Turn off the tap, and off goes the pump – thanks to this controller.

The cut in pressure is adjustable from 1.5 BAR (Approx. 22 PSI) to 3 BAR (Approx. 44 PSI). The cut out pressure is determined by your pump's capacity. It comes complete with its own pressure gauge and non-return valve. What's more, it will automatically turn off the pump if there's no water present, protecting your pump.

Comes complete with everything prepared - no electrician is required. Just mount it on the pump and plug it in. All you'll need is plumbers' sealing tape for mounting. Your pump must be able to reach a pressure of 2.5 BAR (36 PSI) for the controller to work correctly.

Water Pumps Now stocks a range of controllers to suit all pump types and sizes.  

To choose from our full controller range including: liquid level controllers, pump controllers, pressure pump controllers and float controllers click here.

Application

Suits pumps 0.5Hp to 1.75HP. For pumps from 2HP TO 3HP our PC10P controller is the ideal choice.

Features
  • Run dry protection for your pump
  • Non-return valve
  • Wired up ready to go - no electrician needed
  • Installation instructions included
  • Automatic
  • Adjustable
  • Pressure gauge included
  • Suitable for drinking water
  • Keeps a constant pressure
  • 220-240 volt
  • 50/60 Hertz
  • Max Current: 10 Amps
  • Rated: 1.1kw
  • Protection Grade: IP65
  • Max Water Temp: 60 degrees
  • Starting Pressure: 1.5 BAR (Adjustable)
  • Power, Working and Failure electronic lights
  • Manual start (reset) switch