PC10P Pressure Pump Controller

Model Number: PC10P
Inlet/Outlet size: 25mm
Voltage: 240 volt
Packaging Size (cm): 18 x 23 x 25cm
Packaging Weight (kg): 1.5kg
$ 119.00
INCL GST
Add to Cart
Rating: Not Rated Yet

Escaping Outdoors Pump Controller (PC10P) Applications

Escaping Outdoors automatic pressure pump controller for 2-3 horsepower pumps, making use of your pressure pump at home much easier. Turn on a tap, and the pressure controller will automatically switch on the water pump. Turn off the tap, and off goes the pump – thanks to this controller. If no water is present, the controller automatically turns the pump off, protecting it from damage.

This pressure pump controller will run a pump with a peak draw of 30 amps, drawing 18 amps when running – easily controlling a pump up to 3HP. It has a rating of IP65 which is ideal for safe use outdoors.

Comes complete with everything prepared for the 10 Amp pump - no electrician is required. Just mount it on the pump and plug it in. All you'll need is plumbers sealing tape for mounting.

If your pump has a 15 Amp plug or greater the safe option is to have your controller wired in by an electrician.

The controller is not adjustable, and has a factory pre-set cut in pressure of 2.2 BAR (32 PSI), but needs to develop a minimum of 0.8 BAR (12 PSI) above that to function correctly. Minimum head pressure needed is 30 metres. (1 metre of head equals 1.45 PSI).

Alternatively to the PC10P:

If your pump is over 10 amp our recommendations are:

EPS.T-KIT: Digital Pressure Switch

If your pump is up to 10 amp our recommendations are:

RPC22EADJ: Pressure controller with 3 pin plug or contact us for for assistance.

Application

Suits pumps 2 to 3HP

Features
  • Run dry protection for your pump
  • Wired up and ready to go (for 10 Amp pumps) - no electrician needed
  • Installation instructions included
  • Automatic
  • Suitable for drinking water
  • Keeps a constant pressure
  • 220-240V
  • 50/60 Hertz
  • Max Current: 30 Amps
  • Rated: 3.1kw
  • Protection Grade: IP65
  • Max Water Temp: 60 degrees
  • Starting Pressure: 2.2 BAR. Cut out is governed by your pump
  • Electronic lights for Power, Working and Failure
  • Manual start (reset) switch