Pump Control BMS Module - Connects Controller to computer

Model Number: RPC30110
$ 1583.00
Rating: Not Rated Yet

Monitor your water pump via a computer or monitoring system using the BMS module. The BMS module is compatible with the RPC single and dual pump controller range which both have the unique feature of the coded Data Output, which can be utilized to provide a signal to a remote, compatible device such as this BMS Module.

The unique feature is that the coded data signal, derived from the Pump Controller’s microprocessor, is conveyed through a low voltage, 2 wire connection and then decoded by the BMS Module micro controller. Once the signal is decoded the micro controller provides four voltage free relay outputs for interfacing with a computer or other monitoring equipment.

An additional feature of the BMS Module is the inclusion of indicator lights on the circuit board, which can be viewed through the clear enclosure lid, indicating relay ‘switched’ status. The module operates on 9 - 12V AC/DC and is supplied complete with power pack.  Maximum distance between pump controller and BMS module is 150m. The BMS module can also be incorporated inside the Reefe RPC1500 & RPC3000 Dual Pump Controllers enclosure for tidy installation.

Browse our full range of controller options at Water Pumps Now Australia or contact us for assistance.

  • Pump controller additional module with coded data output
  • Data Output
  • Indicator lights
  • Clear enclosure lid
  • Can be incorporated inside the enclosure of RPC1500 & RPC3000 pump control panel

Kit includes:

  • BMS control card
  • Power Pack
  • Poly carbonate enclosure with clear lid
  • 125mm W x 85mm H x 55mm D


  • 2 core communication cable

NOTE: The BMS module is not compatible with the Reefe Campakt controllers

NOTE: When ordering please specify if the BMS module is to suit the dual or the single pump controller