PC10P Pressure Pump Controller

$ 110.00
Out of stock
Model Number: PC10P
Inlet/Outlet size: 25mm
Voltage: 240 volt
Packaging Size (cm): 18 x 23 x 25cm
Packaging Weight (kg): 1.5kg
Ask a question about this product
Rating: Not Rated Yet

Escaping Outdoors automatic pressure pump controller for 2-3 horsepower pumps, making use of your pressure pump at home much easier. Turn on a tap, and the pressure controller will automatically switch on the water pump. Turn off the tap, and off goes the pump – thanks to this controller. If no water is present, the controller automatically turns the pump off, protecting it from damage.

This pressure pump controller will run a pump with a peak draw of 30 amps, drawing 18 amps when running – easily controlling a pump up to 3HP. It has rating of IP65 which is ideal for safe use outdoors.

Comes complete with everything prepared for the 10 Amp pump- no electrician is required. Just mount it on the pump and plug it in. All you'll need is plumbers' sealing tape for mounting.

If your pump has a 15 Amp plug or greater the safe option is to have your controller wired in by an electrician.

The controller is not adjustable, and has a factory pre-set cut in pressure of 2.2 BAR (32 PSI), but needs to develop a minimum of 0.8 BAR (12 PSI) above that to function correctly. Minimum head pressure needed is 30 metres. (1 metre of head equals 1.45 PSI).

Water Pumps Now stocks a range of controllers to suit a wide variety of pump types and sizes.  

Browse Water Pumps Now Australia extensive PUMP range or our wide range of water pump controllers including liquid level controllers, pressure pump controllers and float controllers or contact us for assistance with your pump application.

Application

Suits pumps 2 to 3HP

Features
  • Run dry protection for your pump
  • Non- return valve
  • Wired up and ready to go (for 10 Amp pumps) - no electrician needed
  • Installation instructions included
  • Automatic
  • Pressure gauge included
  • Suitable for drinking water
  • Keeps a constant pressure
  • 220-240V
  • 50/60 Hertz
  • Max Current: 30 Amps
  • Rated: 3.1kw
  • Protection Grade: IP65
  • Max Water Temp: 60 degrees
  • Starting Pressure: 2.2 BAR. Cut out is governed by your pump
  • Electronic lights for Power, Working and Failure
  • Manual start (reset) switch