FL40C Farm Chemical Boom Spray NEW STYLE

$ 115.00
Model Number: FL40C
Max flow: Tooltip 17 L/min
Pressure: Tooltip 40PSI
Inlet/Outlet size: 12mm
Amp draw: 9.2 amp
Voltage: 12 volt
Head/Draw: Tooltip 4m, 1m
Size (cm): 25 x 17 x 11cm
Weight (kg): 2.6kg
Liquid to be pumped: Clean - Salty Water - Agricultural Chemicals

For agricultural boom spraying using 2-6 nozzles with chemical sprays such as Grazon, Cutlass and Roundup, white oil or fertilizer spray the FL40C is the ideal choice. Pumping 17 litres per minute at 40PSI check the rating of your nozzles to ensure the right pump choice.

  • For single wand spraying the FL3203 is recommended
  • For very large boom spraying the FL60C at 60PSI is recommended 

If your flow rate of 17 L/min is higher than the combined rating of your spray nozzles you may have too much pressure in your set-up which can harm the pump and ause the pressure switch to fail. It is highly recommended to install a T-piece immediately after the pump with a gate valve/tap returning back into the tank to balance and alleviate the excess pressure and flow caused by the pump for a smooth running set-up. 

Note: This listing is for the new model with base plate and rubber grommets for added stability instead of 4 rubber feet and this model also has the new type 3 pressure switch.


Specifically designed for several spray nozzles using agricultural chemical sprays. This pump is not for single wand spraying. Choose the FL3203.

  • Automatically turns on and off
  • Base plate with rubber grommets for greater stability an noise suppression
  • New type 3 pressure switch
  • Self Priming
  • Easy to install and operate
  • Able to pump agricultural sprays
  • Low power consumption
  • Reliable performance
  • Run dry protection
  • No maintenance
  • Made from durable, lightweight non-corrosive materials
  • Supplied complete with fittings and filter
  • Installation instructions included
  • 1 year warranty