FL40 Caravan - RV - Bus Pump - NEW STYLE

$ 100.00
Model Number: FL40
Max flow: Tooltip 17 L/min
Pressure: Tooltip 40PSI
Inlet/Outlet size: 12mm
Voltage: 12 volt
Amp draw: 9.2 amp
No. taps/outlets: 3 - 4
Head/Draw: Tooltip 4m, 1m
Size (cm): 25 x 17 x 11cm
Weight (kg): 2.6kg
Liquid to be pumped: Clean - Salty Water

The FL40 is ideal for supplying 40PSI pressurised water in a 12 volt environment such as in a caravan or an RV.  Has a flow rate of up to 17 litres per minute so is able to run a toilet or shower and several taps.

Note: This listing is for our new model which has the improvement of a base plate with rubber grommets for greater stability and the new type 3 pressure switch.

The pump will automatically turn on and off when you turn the tap on and off.  Designed for intermittent use. 

It is recommended that diaphragm pressure pumps be used with an accumulator tank in the system for quieter operation, to reduce hammering and pump cycling and to lengthen the life of both your pump and your battery when used in a pressurized set-up. 

If you are pumping water to a Hot Water Service check your HWS pressure rating. The FL35 pump is usually a better choice for a 12 volt hot water service.


For larger caravans, motor homes, cabins, RV's. You can even change the seal to a chemical seal and double this pump up as a chemical boom spray pump for the farm.

  • Automatically turns on and off
  • New base plate with rubber grommets for greater stability and noise suppression
  • New Type 3 pressure switch
  • Self Priming
  • Easy to install and operate
  • Able to pump fresh water or salt water
  • Low power consumption
  • Reliable performance
  • Run dry protection
  • No maintenance
  • Made from durable, lightweight non-corrosive materials
  • Supplied complete with fittings and filter
  • Installation instructions included
  • 1 year warranty