Pressure Switch and Seal Kit - 12v 40 PSI Type 3

Type 3 pressure switch and seal kit suiting the Escaping Outdoors FL40BP, FL40C, FL40CBP, FL43BP, FL44BP and FL44CBP 12v, 24v and 240v diaphragm water pumps range.

Failure of a caravan style water pump can usually be attributed to the pressure switch. Designed to regulate the delivery pressure, the switch works by turning the pump off when the set pressure is reached, and turns the pump back on again if the pressure drops.

Escaping Outdoors Pressure Switch and Seal Kit 40PSI Type 3 Features

  • Type 3 40 PSI Pressure Switch + Seal Kit.
  • Simple and easy to replace.
  • Pressure Adjustment Screw to reduce the PSI.
  • Your Pressure Switch and seal kit will be sent with Tracking.
  • Make sure your screw holes from your current switch will match. (34mm centres)
  • Type 3 40psi pressure switch is also available as a pressure switch only

Failure of a caravan style diaphragm water pump can usually be attributed to the pressure switch. Designed to regulate the delivery pressure, the switch works by turning the pump off when the set pressure is reached, and turns the pump back on again if the pressure drops.

If your pressure switch fails after a short time (less than 12 months) this can be an indication that the pump set up needs refining. Please call for assistance with your set up.

Check out article in FAQ's on how to test for a failed pressure switch and other articles which may be of interest.